Classic Series '50s Stratocaster Lacquer Maple Soft V Neck 7.25" Radius 21 Fret
Currently out of Stock
This official Fender Classic Series '50s Stratocaster Lacquer Maple Neck has a vintage style soft V profile, 7.25" fretboard radius, 21 frets and a nitro lacquer finish.
The synthetic bone nut is pre-slotted with 'pilot' string slots to make spacing a breeze when performing the final string slot filing, the neck has 9.1 mm tuner bushing holes drilled on the headstock face for vintage style tuners with press fit bushings (some reaming of the hole may be required for a perfect press fit) and the truss rod adjustment nut is at the heel. This replacement neck is the perfect way to give your strat an authentic '50s feel and fits Fender or Squier curved heel end stratocaster guitars. Some fret levelling/dressing and polishing may be required and minor woodwork to fit the neck to the body.
Please note the photo displayed is an example image only and the wood grain and serial number will differ on the neck you receive.
|Official Fender one piece Stratocaster maple neck w/ walnut skunk stripe|
|Vintage style soft V shaped neck profile|
|Fitted synthetic bone nut with pilot string slots|
|Headstock drilled for press fit tuner bushings|
|Truss rod adjustment at the heel|
|Nitro lacquer finish for vintage feel|
|Some fret levelling/dressing and neck fitting may be required|
|Photo is example only, actual wood grain/serial numbers will differ|
|Tuner Bushing Hole Diameter||9.1 mm (0.36")|
|Nut Width||42 mm (1.65")|
|Fret Crown Height||1.1 mm (0.043")|
|Fret Width||2 mm (0.078")|
|Heel Width||56.3 mm (2.2")|
|Neck Thickness at 1st Fret (approximate)||21.6 mm (0.85")|
|Neck Thickness at 12th Fret (approximate)||22.6 mm (0.89")|
|Manufacturer Part Number||0990061921|