Skip to main content

DIY Cir-Kit Components and Breadboard Bundle
by Coppersound Pedals


£81.95

2 In Stock

Dispatched within 1 working day
Ships to 103 countries worldwide


Kit Model
Silicon Fuzz Hard Clip Distortion Treble Boost Single Transistor Overdrive MOSFET Boost 3 Band EQ LPB-1 Boost-A-Drive-A-Fuzz

Description

This CopperSound Pedals DIY Cir-Kit Components and Breadboard Bundle is the perfect way to get started building guitar pedals, containing everything you need to finish your first project.

The bundle contains a Cir-Kit Components Bag for a specific pedal, a 9 V power supply (UK plug) and a small size CopperSound Pedals DIY Breadboard which has been specifically designed for prototyping guitar pedals and give you a convenient platform to quickly and easily develop your circuit. CopperSound Pedals have great, simple to follow step by step build guides for each pedal type available on their website.

The breadboard features integrated input and output jacks for the audio signal, centre negative power jack, on/off bypass switch and status LED and there are onboard pin headers that allow you to easily connect the breadboard bus strips/rails to power and the terminal strips to the signal jacks. Each section of the breadboard has five rows of tie points (the holes where the component is inserted) either side of the IC DIP Chip channel labelled a-e and f-j and the connected columns are numbered. It has a 'courtesy ground' pad where you can place the negative tip of a multimeter and then use the positive tip to check the voltage at any point in the circuit and also has mounting holes in the corners for a convenient method of securing the board to a larger work surface if required.

Please note the included Cir-Kit Components Bag is designed for use with the included breadboard (that has integrated jacks etc.) so these kits do not come with any standalone jacks or footswitch, so if once you have finished building the pedal on the breadboard you wanted to then wire it into a pedal enclosure you will then also need these components.

We have these kits available to build the following pedals:

  • LPB-1 Boost-A-Drive-A-Fuzz (a collaboration with Josh Scott from JHS Pedals)
  • Silicon Fuzz (Fuzz Face style)
  • Hard Clip Distortion (RAT style)
  • Treble Boost (Rangemaster style)
  • Single Transistor Overdrive (Electra Distortion style)
  • MOSFET Boost (Jack Orman MOSFET Boost / Super Hard On style)
  • 3-Band EQ (Baxandall active EQ style)

Features

Coppersound Pedals DIY Cir-Kit Components and Breadboard Bundle is the perfect way to start building
Bundle contains a Cir-Kit Components Bag, a 9 V power supply (UK plug) and a CopperSound Breadboard
The CopperSound Pedals DIY Breadboards are specifically designed for prototyping guitar pedals
Breadboard features input and output jacks, centre negative power jack, on/off bypass switch and LED
Onboard pin headers easy connection from the breadboard power and signal rails to the jack sockets
With 'courtesy ground' pad to easily check voltage at any point in the circuit
CopperSound Pedals DIY Cir-Kit Components contains all the electrical parts to make a guitar pedal
Convenient kit to get you started on your project quickly and easily
Seven different pedal types to choose from
Simple to follow step by step build guides for each pedal type available on the CopperSound website

Tech specs

Manufacturer Part Number Cir-Kit Bundle: Silicon Fuzz
UPC-A 850045133375

Customer reviews

5.0 out of 5


Edward B. Verified Purchase

Excellent item

Really good item for swapping out components and seeing how it affects the sound. Many hours of fun. Just need to know how to transfer from breadboard and making into point to point wired pedals.

Reviewed ago