Engager Boost and 3 Band EQ Pedal
2 In Stock
Dispatched within 1 working day
Ships to 103 countries worldwide
The Fender Engager Boost Pedal is more than a simple volume increase, with a 3 band EQ and mid frequency select switch this is a versatile tone shaping device.
Designed to fit anywhere in an instrument's signal path, the Engager can be used as a boost, equaliser or a combination of the two, place in front of an overdrive pedal to add saturation, at the end of your chain for a flat volume boost or use as a tweaked lead tone to cut through the mix for a solo. The Level control gives up to 20 dB of clean boost and the Bass, Middle and Treble controls boost or cut frequencies by +/- 12 dB. The Frequency switch sets the frequency affected by the Middle control knob, either 400 Hz (down) or 800 Hz (up). The Bypass switch at the top of the pedal selects between true bypass and buffered bypass, in the buffered setting the signal goes through an active buffer stage that provides low impedance output for driving long cable runs and multiple effects.
The Fender Engager Boost Pedal features LED lit knobs that make viewing the current settings very easy in a dark environment (switchable on/off), a magnetically latched battery door at the front of the pedal makes changing batteries super quick, no screwdriver required, and a low battery indicator LED on the front of the door lights up to show when the battery needs replacing.
|Use as a boost, equaliser or a combination of the two|
|Level control knob gives up to 20 dB of clean boost|
|Bass, Middle and Treble knobs boost or cut frequencies by +/- 12 dB|
|Frequency switch sets the frequency affected by the Middle control knob, either 400 Hz or 800 Hz|
|Bypass switch selects between true bypass and buffered bypass for driving long cable runs|
|LED lit knobs make viewing current settings very easy in a dark environment (switchable on/off)|
|Magnetically latched battery door makes changing batteries super quick|
|Low battery indicator LED lights up to show when the battery needs replacing|
|Durable anodised aluminium enclosure to easily withstand the rigors of touring|
|9 V Power jack|
|Width||70 mm (2.8")|
|Length||124 mm (4.9")|
|Height||64 mm (2.5")|
|Power Draw||50 mA|
|Manufacturer Part Number||0234536000|