This official Fender Deluxe Series Stratocaster Alder Body has H/S/H pickup routes and is pre-drilled for a 2-point tremolo with their standard 2.22" post spacing. The body features a contoured heel for easier access to the high frets.
Making your own partscaster guitar couldn't be simpler with this strat body from Fender, all the routing and shaping is done and it is topped with a durable gloss polyester finish. The strap button, neck mounting and tremolo bushing holes have been drilled but all other screw holes will need to be drilled (scratchplate, jack plate etc.) allowing you fit ensure the fit of your own hardware. The humbucker/singlecoil/humbucker (H/S/H) pickup routes give you great flexibility over choosing which pickups to install (e.g. install a H/S/S pickguard and just the bridge humbucker route or even classic S/S/S). Some minor woodwork to fit the neck to the body may be required, the body pairs with standard Fender or Squier curved heel end strat necks but please note the offset neck screw spacing for the contoured heel (if your Fender neck is pre drilled for their standard rectangle neck screw spacing you will need to drill a new hole in the neck for the offset screw).
Please note the photo displayed is an example image only and the wood grain and serial number will differ on the body you receive.
|Official Fender Stratocaster fully shaped alder guitar body|
|H/S/H pickup routes gives great flexibility over pickup choice|
|Contoured heel for easy access to the high frets|
|2 Point tremolo bushings, strap button and neck screw holes have been drilled|
|Durable gloss polyester finish|
|Some minor woodwork to fit a neck to the body may be required|
|Photo is example only, actual wood grain/serial numbers will differ|
|Made in Mexico|
|Tremolo Post Spacing||56.4 mm (2.22")|
|Manufacturer Part Number||0997103700|